How To Build a Backyard Pond
 |
LOCATE
To
determine the location of your new pond, keep
in mind the layout of your yard and the type
of plants you wish to use. Place a preformed
pond liner in the determined location, stand
inside it and outline the shape on the ground
with a shovel. If you will be using the sheet-style
of pond liner, use a garden hose to outline
your shape.
|
 |
EXCAVATE
Dig
a hole just a little larger and deeper than
the pond. |
 |
BACKFILL
Bed
the hole with a layer of compacted sand, place
the preformed plastic pond
or sheet liner in and level it. Using loose
dirt or sand, fill in around it. Stop when the
perimeter is half full.
|
 |
FILL
WITH WATER Alternately
fill the pond with water and backfill perimeter
with dirt or loose sand a little at a time so
that both the pond and the hole are completely
filled and these steps are finished concurrently.
If you are using chlorinated water, wait 24
to 48 hours before placing plants or fish in
the pond. Place stones naturally around the
perimeter to cover the edge. |
| NOW
ENJOY!
By
installing two or more ponds adjoining each
other, you can create a small water park or
borders for a bridge. Washed, decorative stone
may be placed on the bottom of the pond. Dirt
and sediment that fall in will be less noticeable.
We also carry water runs to make installing
a custom waterfall easy. Aquatic lighting will
enhance your pond at night. |
 |
Flowers
Marigolds, Irises, Forget-me-nots, and mint are plants
that do well in the moist soil surrounding your pond.
Fish
are a nice addition to your pond. We suggest you use
a bio filter with the fish. Goldfish are inexpensive
and hardy. Koi are more expensive, but are a cleaner
fish. For the best results, contact the pet store where
you purchase the fish.
The
above information is for general information only, and
is not necessarily the opinion of Sutherlands. Always
check your local codes before building, and obtain the
required building permits.
|
|
