Since 1917

Replacing a Damaged Area of Carpet

1. Nail a template, i.e. can lid or wood cutout, over damaged area. Leave nails sticking out.

 

2. With a razor blade, cut out carpet around template. Repeat first 2 steps for the new patch.
3. Clean loose fibers. Place double-sided tape halfway under carpet edges. Place glue on patch edges.
4. Press Patch in place. Place heavy object on patch overnight.
Sutherlands® provides these project tips and guides as a service to our visitors. Due to possible variance in conditions, equipment, materials and individual skill levels, Sutherlands® assumes no responsibility for losses or injuries incurred during maintenance or repair of your property. Sutherlands® assumes no liability for errors or omissions in the Resources section of this website. Please read and follow any safety precautions provided by tool and equipment manufacturers, and consult a building professional in your area if you have any questions about a repair project. Always check your local codes before building, and obtain the required building permits.